Tampa Precision Concrete prices pool deck resurfacing after we see the slab, because the cost depends almost entirely on what is under the old coating. A sound deck that only needs a fresh knockdown or cool-deck surface costs well below replacement, and replacement runs $9 to $14 per square foot with a knockdown finish.
For scale, a 600-square-foot deck torn out and repoured lands around $5,400 to $8,400, plus $1,200 to $3,000 to remove the old concrete. Resurfacing exists to avoid that second number.
Pool decks take more abuse here than almost anywhere. Summer sun, chlorinated splash, salt from saltwater systems and, on Davis Islands or in Apollo Beach, salt air off Tampa Bay all go after the surface.
Here is how to tell which bucket your deck falls into and what moves the price.
Walk the deck barefoot in the morning and look closely. The surface coat is the part that wears. The slab underneath is what decides the bill.
A new coat bonds to whatever it sits on. Put it over a panel that is still moving and the crack telegraphs back through within a season or two.
Most of the labor happens before any texture goes down. We pressure-wash, grind or strip loose paint and old sealer, then route and fill cracks. Decks painted many times over the years take the longest, because every layer of loose coating has to come off.
A sprayed and troweled knockdown is the standard around Tampa pools. It grips wet feet and runs cooler than bare gray concrete. A cool-deck acrylic coat reflects even more heat, and a stamped overlay or stain sits at the top of the range. Fully stamped or stained new concrete runs $12 to $20 or more per square foot, which tells you where decorative work lands.
Small decks hit a minimum charge, typically $600 to $1,500 in the Bay Area. Decks inside a screened lanai cage, common across Westchase, Carrollwood and Brandon, take extra masking and careful work around the cage footings, but they also hold up better because they get less direct rain and leaf litter.
Tampa averages roughly 49 to 50 inches of rain a year, and nearly two-thirds of it falls from June through September. A deck that doesn't slope away from the water, or has a failed joint at the coping, lets that rain wash sand out from under the slab, which is how panels start to drop.
Salt chlorine generators are popular here. Salty splash that dries on the deck leaves crystals in the pores of the concrete, and over time that scales the surface. Rinsing the deck with fresh water and resealing on schedule slows it down. Homes closer to the bay deal with airborne salt on top of that.
Heat matters too. Summer highs sit around 90 to 91 degrees from June through August, and dark tints can turn a deck into a griddle. We steer most clients toward light colors for that reason.
After resurfacing, give the coating a few days before heavy furniture goes back on it, and use pads under chair legs. Rinse off splash from saltwater pools every week or two, keep pool chemicals off the deck, and reseal on the schedule we leave with you. Those habits add years to the finish.
If the deck has settled because the backfill around the pool shell compacted, a coating won't fix it. Sometimes concrete leveling can lift sound panels back into place before we resurface. When panels are cracked through and tilting, a full pool deck replacement is the better buy.
Replacement also lets you change the layout. Many owners use it to widen the deck, add a step-down patio for a grill, or run a walkway to the side gate. If the yard drops off toward a canal or retention pond, a short retaining wall can hold the new edge.
Coatings need dry concrete and a few rain-free hours to set. We schedule most resurfacing from October through May, when afternoon storms are rare. Summer jobs start at first light. Our notes on pouring in Tampa heat and rain explain why we're careful about that window.
Plan around hurricane season, which runs June 1 through November 30. A freshly coated deck doesn't mind a storm once it has cured, but crews and materials get scarce after a named storm comes through.
We sound the deck with a hammer, check the coping joint, measure and photograph the cracks, and tell you plainly whether a new surface will last. Then you get a written price for resurfacing, replacement or both. Ask for a free estimate on your pool deck.